9 Signs You're A Double Glazing Locks Repair Expert
Double Glazing Locks Repair
When a double-glazed windows will not close, it causes drafts that allow heat to escape. This also weakens the security of your home and puts you at a higher risk of being a victim of burglary.
Over time, double glazed window hinges, handles and seals can become damaged. If this happens it could affect the functionality of your windows and invalidate any warranties you may have.
Locks with a problem
Many people put anti-burglar devices on their main gates and doors however, they forget that windows are prime targets for burglars. Insecure locks can lead to drafts, let heat escape and weaken the security of your home.
If you find that your uPVC window locks are not functioning, there is a good chance that the mechanism for locking is jammed. This usually happens due to a split in a gearbox component. This can cause the handle to turn 360 degrees, but not fully open. This is a common problem with uPVC casement windows, but is also present in tilt and turn windows, and even sliding sash windows.
If this happens you can release the lock by applying pressure on the lever handle. This will unblock the gearbox and then restore the window's opening. If this does nothing then you might need to replace the entire mechanism for locking windows.
Most modern uPVC windows use espagnolette locks. These are a locking system inside the window that secures the window by employing locking cams shaped like mushrooms which are inserted into frame keeps. The handle controls the gearbox that then triggers the cams to either move upwards or downwards. The spindle of the lock can break and cause the handle to move, but the window to either open or close.
A damaged gearbox may cause your window to appear to be locked but not actually be. This is because the rods that are the center, also known as crocodile tooth fixings in the gearbox are snapped off. If this is the situation, Misty Glaze can supply and install replacement rods to restore the functionality of your window.
It is not advisable to force an unbreakable lock or stuck lock. This can cause the lock to snap or break in particular if you are using windows made of uPVC which expands and contracts when temperatures change. To avoid this, it is best to contact a professional locksmith to identify the problem and repair it.
Sticky Doors/Window
It is annoying to find doors and windows that are stuck, but they may be a sign of more serious structural issues. If you find it difficult to open or close a window or door it is important to seek help from a professional immediately. This issue can result from a variety of factors, including foundation settlement or an absence of support for the crawl space.
Windows and doors can get stuck due to humidity or a problem with the frame itself. If your frames are wood for instance, they could warp when exposed to humidity. This could make opening and closing them difficult even if the hardware is in good shape. If this happens the wood expands and presses against the hinges, causing friction.
If your door or window gets stuck in the summer you can try rubbing it with bar soap to decrease the friction. This will make it less swollen and may resolve the problem temporarily. This solution will need to be repeated periodically during periods of high humidity.
A more permanent solution involves sanding the window or door frame down to an even finish. This can be done by hand or using a power tool. double glazing repair can also sand and paint, or stain your frame or door to make it look new again.
If sanding and soap aren't helping it's likely that the issue is due to foundation settlement or a weak crawl space. Look for cracks in the area. It's time to contact an expert in foundation If you notice any of these indications. Damage to the foundation can cause uneven floors, a misaligned wall and stuck windows and doors. It's important to address these issues as early as possible to avoid more costly and dangerous repairs in the future. If not addressed, these issues could escalate to the point where your entire house is structurally unstable. Contact the Southeast's most renowned foundation repair specialists today to arrange an inspection and repair service!
Cracking/Blowing Issues
When double glazing starts to wear down, it could cause cracks to develop. It can be unappealing and it also allows all the heat that has been build up within your home to escape. It can also be an hazard for your family, since the sharp pieces of glass could cause injuries when they break. It is best to fix any double-glazing window with a crack before they get worse. This can increase the cost of replacement.
Window seals are vital to keep air out between your window panes and they also stop drafts from entering your home. However, as time passes, these will deteriorate or shrink due to weather changes. Unchecked, it can result in condensation, moisture, and draughts in your home.
This issue is usually resolved by an expert. They will be able to replace the window seal and get your windows back to their original condition. They will also suggest features that will reduce future stress cracks, like trickle ventilation for better air circulation.
You can also try lubricating the hinges as well as handles on your windows and doors. This will enable them to move more easily and allow the lock to function as it was intended. Apply lubricating oil to a clean cloth and rub it into the handles and hinges, as well as the areas where they go through the frame (for example, sash windows). You can also remove the handles and clean them in warm soapy water to get rid of any dirt or grit.
If your uPVC windows and doors are not functioning in the way they should, it is important to call in a professional to fix them. They can identify the problem quickly and solve it in a short time. It's a lot less expensive and safer than trying to do it yourself and possibly harming the mechanism. You'll also be able to rest in peace of mind knowing that your home is secure and safe.